RC F-22 from styrofoam

This radio-controlled model aircraft F-22 is made from styrofoam (Blue Foam, aka Pink Foam, aka EXTRUDED Polystyrene). Sheet thickness 30 mm. Characteristics of a RC model airplane F-22: - Length 1050 mm - Wingspan 740 mm - Take-off weight of 750 grams - Motor dualsky XM3530 1450 kV - Screw APC SF 9h4, 7 - ESC Dualsky at 25 A - LiPo 3S 2200 mAh Download RC model airplane drawings F-22 Raptor is here. You can use the following on a model airplane brushless motors: TR 28-26 16A 1900Kv Brushless Outrunner   Propeller 8х4. Thrust 950 grams. TowerPro Brushless Outrunner 2409-12T,  8х4, >1050 grams. TowerPro Brushless Outrunner TP2409_12D. Not less powerful than the previous. All motors are used with propellers 8x4 or 7x6. ESC: Hobbyking SS Series 35-40A ESC Mystery 30A BEC Tunigy AE-30A Brushless ESC TURNIGY Plush 30amp LiPo: Polyquest 1200mAh 3S 30C - 50C Turnigy 1500mAh 3S 20C Lipo Pack Rhino 1750mAh 3S1P 20C Lipoly Pack Polyquest 2200mAh 3S 25C - 40C Lipoly ZIPPY Flightmax 2200mAh 3S1P 20C ZIPPY Flightmax 2200mAh 3S1P 30C ZIPPY Flightmax 2200mAh 3S1P 25C Turnigy 2200mAh 3S 20C Lipo Pack Servo: 4x  HXT900 9g / 1.6kg / .12sec Micro Servo  Begin production of radio-controlled model aircraft F-22 Make this model aircraft is very simple - print drawings aircraft model F-22, running his patterns, cut, glued together. Everything! It only remains to install the electronics. Of the small nuances only sanding to give the appearance, but sizing serpyanku (it's special construction belt, which is intended to strengthen the surface, you can use medical bandages) front edges of a model airplane and the wing span above and below. Motor mounted on a frame made of a wooden ruler or a veneer. Helms model airplane made of two layers potolochki. Rudders and the servo can not install. On the flight they affect only slightly. After making model aircraft to be painted. What would distinguish the position of the aircraft in flight. The first flights of the F-22 model airplane: How to make RC Airplanes