• Free Plans
  • Manuals
  • Make RC Airplanes
  • Video
  • Technology
  • Free paper models

  • How to do it
    • Creating Paper Models
    • Make CNC machine


    • RC in Russia



    Saturday

    RC model Ptic

    I found this model on the site RC-Aviation.ru.
    think it's quite fun model that looks like a bird.

    Weight 95 grams a model airplane in flight condition. Wingspan 48 cm. Сenter of gravity - 45 mm from the front edge of the wing

    Nice flight on the Ptic.

    Free drawing of a model airplane (click to resize images)

     Brushless Motor C1818 Micro brushless Outrunner 3500kv (9g): Hobbysity.com. With screw 5x4.3 it gives 115-120 grams. It flies well, and a third thrust, and with a maximum goes straight up.

    Servos
     Used 2 HXT500 5g / .8kg / .10sec Micro Servo: Hobbysity.com

     ESC
     Hobbyking SS Series 8-10A ESC: Hobbysity.com

    LiPo
     Rhino 360mAh 2S 7.4v 20C Lipoly Pack: Hobbysity.com. Weight 22.5 grams and 7А (10А  max).

    Alternative set of electronics
    If not above, then you can buy the following items
    :
     Brushless Motor

    C2024 Micro brushless Outrunner 1600kv (17g): Hobbysity.com. Screw: GWS7035 - 254 grams, 5A
    C1826 Micro brushless Outrunner 2400kv (18g) Hobbysity.com.7x3.5 - 235 grams, 6,1A; 7x3.8 - 250 grams, 8А
    HobbyKing 2402 Brushless Outrunner 2350kv (16 грамм): Hobbysity.com. Screw 8х4 - 255 grams, 7А.
    HobbyKing 2403 Brushless Outrunner 2100kv (18.4g ): Hobbysity.com. Screw 8х4 - 265 grams, 7.1А.
    TURNIGY 2204-14T 19g Outrunner (19 г.): Hobbysity.com. Screw 8х4 - 250-270 grams, 5-7 ампер.
    AX 1806N 2100kv Brushless Micro Motor (19g): Hobbysity.com. GWS7035 - 185 grams, 5.5 А.
    AX 1806N 2500kv Brushless Micro Motor (19g): Hobbysity.com.5x3 - 225 grams, 6.4A; 5x4.3 240 grams, 8A.
     ESC 
    The ESC needed for 9-10 ampere. Such as the fact that I pointed out above, as an alternative. You can still take:
    Mystery 12A Brushless Speed Controller: Hobbysity.com.
    TowerPro 9g w12A Brushless Speed ControllerHobbysity.com.
    TURNIGY Plush 10amp 9gram Speed Controller: Hobbysity.com.
    TURNIGY Plush 12amp (2A BEC)Hobbysity.com.
    HobbyKing 12A BlueSeries Brushless Speed ControllerHobbysity.com.

    LiPo
    Rhino 360mAh 2S 7.4v 20C Lipoly Pack: Hobbysity.com. Very good LiPo!
    ZIPPY Flightmax 350mAh 2S 20C: Hobbysity.com. Practically the same thing, but from another manufacturer.
    Turnigy nano-tech 370mah 2S 25~40C Lipo Pack: Hobbysity.com.

    If you take the engine which consumes 7Amper and more, it is necessary to put the previous or the battery, or those that are listed below.

    Rhino 460mAh 2S 7.4v 20C Lipoly Pack: Hobbysity.com.  9.2А, 13.8А max.
    Turnigy nano-tech 460mah 2S 25~50C Lipo PackHobbysity.com. 11.5А, 23А max.

    Servos
    HXT500 5g / .8kg / .10sec Micro Servo: Hobbysity.com.
    Turnigy Servo 5.5g/0.9kg/.10sec: Hobbysity.com.
    D05010MG 5.7g / .61kg / .07sec Digital Metal Gear Micro ServoHobbysity.com.
    9103MG Metal Gear Servo 4.4g / 0.8kg / .12sec: Hobbysity.com.
    VS9 4.4g / .6kg / .08sec Servo: Hobbysity.com

    As you can see the cost of electronics for radio-controlled model is very small.

    Make a RC model aircraft with their own hands 

    .Cut a piece of model airplane from deprone.


    Bend on the dotted line.
    Glue wood or carbon fiber rods.


    Install the servos and sticking ailerons and elevator.


    Join the servo and steering the plane using the rods.




     It remains to fix the battery, motor and aviamodelgotova for the flight.


    How to make RC Airplanes

    Labels: ,

    Comments on "RC model Ptic"

     

    post a comment