"Chick" - easy RC AirModel (part 2)

End of the wing camouflage wingtips:  And process them in the form of wings:  Started to make a  fuselage our RC AirPlane. Carefully bend along the fuselage. It breaks not allowed Paste the rib in the fuselage Stepped back from the front of the fuselage centimeter, paste short rib:  We take a lower part of the fuselage and glue it    Ok. The fuselage is completed. I made a motor mount from a wood rail (cross section of 1x1 cm, length 13 cm)/ Cut a hole in the rib under fuselage and through the wood rail. Mount a landing gear Take a long rib and paste it so that the landing gear were between ribs:  Ok. Next step - Cut a hole in the top of the fuselage to install the wing Now we paste together two parts of the wing      Merge the wing and fuselage   And install a servo for ailerons:   Next step - install a elevator   and rudder Ok. Try to weigh up our model aircraft 118 grams! It's very good!     Now put the electronics on RC model aircraft. Install elevator serovo   And motor set Connect ailerons and servo: And do a hood of fuselage   Install a receiver (on 2 side scotch tape) Flying weight with battery LiPo 7,4 in 1100mAch 15C is 282 grams - PERFECT! Photo of completed "Chick" model   First fly on RC "Chick" model AirPlane   Video of this RC Model Thanks for you time!